Version of 16 April 2018
19
Satellite Guide
This menu item will be helpful when
adjusting the satellite installation.
Menu functions and settings:
Local longitude:
Define the
value for the longitude of the place
where the satellite reception facility
is.
Local latitude:
Define the value
for the latitude of the place where
the satellite reception facility is.
Calculation:
Navigate the
cursor using the arrow buttons on this specific item and press the OK button. The
orientation and altitude values are calculated automatically.
Exit the ‘Satellite Guide’ menu pressing the
EXIT button.
Terrestrial Installation
Press [OK] key to enter the selected
item.
1. You can select the Bandwidth
by region (country).
2. You can set the Tuner Power
ON/OFF.
3. Press [Red] key can directly into
blind scan mode to scan the
current programs.
4. Press [Green] key to enter
the following menu.
Scan Mode.
1
There are two modes. You can scan channel by channel or by frequency”.
2
When scan band is UHF and region is “France”, the range of Ch No. is from 21 to 69.
3
When scan Band is VHF and region is “France”, the range of Ch No. is from 1 to 9. (it’s according to region)
4
Press [Red] key to enter blind scan menu, or press [Green] key to enter TP scan menu.
5
Press [Exit] key to exit the scanning
.
Cable Installation
Press [OK] key to enter the selected
item.
1. You can select the Scan
Mode, Manual Scan or Blind
Scan.
2. You can input the Frequency by
use the numeric button of the
RCU.
3. You can input the Second
Frequency by use the numeric
Summary of Contents for OS mini DV3 S2
Page 31: ...Version of 16 April 2018 31 ...
