Edision OPTIMUSS OS1, User Manual

Page: 16 / 65

Optimuss OS User’s Manual
II. Installation
This chapter will guide you through the whole installation process. Please read each section carefully to
make sure the system run properly.
1. Connecting TV, Audio, and Antenna
2. Connecting your TV to the receiver
● There are various types of connections, but please consider to follow the order below if available
for the best possible picture quality.
1. HDMI connector
2. Component(Y, Pb, Pr) connectors
Please select RGB for the SCART TV item in the Audio, Video menu, if your TV supports
this mode because it is more clear than YC or CVBS.
● Using A HDMI Cable : If you have a HD television set, you should use a HDMI cable for the best
results. Plug receiver’s HDMI cable to the terminal marked “HDMI” on the rear panel of your receiver and
its other end to the TV HDMI input. In this case, you do not have to make audio connection because the
HDMI connector can output stereo audio or Dolby Digital audio.
● Using Component video cable : Plug the component video cable (RCA video cable) into the
appropriate RCA jacks on your receiver : Y (green), Pb (blue), Pr (red) according to the color of both sets.
- 16 -