WARNING:
The wire connector (E) contacts have sharp edges for
piercing themain low voltage cable. To avoid injury, do not touch the
metal contacts.
CAUTION:
The wire from low voltage power unit should be 12-16
AWG type underground low Energy Circuit Cable.
IMPORTANT:
- Protect the wiring by routing it in close proximity to the light fitting,
or next to a building structure such as a house or a deck.
- The landscape wire and connector can also be hidden under stone
or buried under grass at a maximum depth of 6 in. (15.24 cm).
- Do not installthe fixture within 10 ft. of a pool, spa, or fountain.
- Do not submerge the fixture in water.
2.Connecting the wires
03
Place the wire connector(D) on opposite sides of the low voltage cable
(not included)from the transformer (not included)where the fixture will be
located.
Align and fit the main low voltage cable vertically to the slot of the wire
connector (D).
Press the wire connector (D) together until it is locked around the main
low voltage cable. The pre-set prongs will pierce the cable insulation and
establish contact with the electrical wire inside.
Once the wire connector (D) is in place, it is recommended to wrap it with
electrical tape (not included).
After all fixtures are installed, turn on the transformer.
D
