manualshive.com logo in svg

Edirol UA-101, Owner'S Manual

Share
Download
Edirol UA-101 Owner'S Manual Download Page 59

 

59

 

Troubleshooting

1.

 

With the UA-101 disconnected, start up Windows.
You must disconnect all USB cables except those for a USB keyboard and 
USB mouse (if used).

 

2.

 

From the Windows 

 

start

 

 menu, open the 

 

Control Panel

 

.

 

3.

 

Click 

 

“Switch to Classic view”

 

 to choose the Classic view.

If the Classic view is already selected, proceed to the next step.

 

4.

 

Double-click the 

 

EDIROL UA-101

 

 icon.

 

5.

 

From the Driver menu of 

 

EDIROL UA-101 Control Panel

 

, choose 

Uninstall.

 

6.

 

Follow the instructions in the dialog box to uninstall the driver.

If you are unable to delete the driver as described above, you can use Uninstal.exe 
(found in the Driver folder of the CD-ROM) to delete the driver.
For details, refer to Readme.htm in the Driver folder of the CD-ROM.

 

Deleting the driver

UA-101_e.book 59 ページ ２００７年８月６日　月曜日　午後１時２３分

Summary of Contents for UA-101

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands