35
Advanced use
■
Natural
This effect adds a natural finish that does not impair the original character of the sound.
■
FAT Comp
This effect produces a thick, robust sound.
■
Final 1/2/3/4
These effects let you make more detailed settings as necessary. With the factory settings, these effects are set
as follows.
List of effects
Parameter
Range
Explanation
CROSS
10.0–14k (Hz)
Specifies the frequency at which the low and high ranges will be divided.
COMPRESS
0–100
Lowers the threshold of the multi-band compressor (the volume at which
the compressor begins to apply), and simultaneously raises the volume.
The result is that the level differences between high volume and low
volume will be smoothed out, making the overall volume more consis-
tent and raising the overall loudness. Increasing this value will intensi-
fy the result. Unlike simply raising the volume, this produces a thicker
and denser sound.
CLARITY
0–100
Controls the enhancer to specify the degree to which the sound is clar-
ified. Higher settings will produce a stronger effect.
* If you excessively apply this to a sound that is already clear, it will make
the sound unpleasant or distorted.
Parameter
Range
Explanation
L COMPRESS
0–100
Lowers the low-frequency threshold for the multi-band compressor,
and simultaneously increases the volume. This will thicken the sound
of the low-frequency range. Increasing this value will set this to a high-
er level. Unlike simply raising the volume, this produces a thicker and
denser low-frequency range.
H COMPRESS
0–100
Lowers the high-frequency threshold for the multi-band compressor,
and simultaneously increases the volume. This will thicken the sound
of the high-frequency range. Increasing this value will set this to a high-
er level. Unlike simply raising the volume, this produces a thicker and
denser high-frequency range.
Final 1
Improves the overall balance.
Final 2
Boosts the low-frequency range.
Final 3
Clarifies muddy sound.
Final 4
Smoothes out inconsistencies in the sound.
Parameter
Range
Explanation
Cross
10.0–14k (Hz)
Specifies the frequency at which the multi-band compressor’s low and
high frequency ranges will be divided.
ThrsL
-50–0
Specifies the volume at which the low-frequency range compressor be-
gins to apply.
GainL
-50–24
Specifies the amount of boost or cut for the low-frequency range.
ThrsH
-50–0
Specifies the volume at which the high-frequency range compressor be-
gins to apply.
GainH
-50–24
Specifies the amount of boost or cut for the high-frequency range.
Clarity
0–100
Controls the enhancer to adjust the strength of the effect that clarifies
the sound. Increasing this value will produce a stronger effect.
* If you excessively apply this to a sound that is already clear, it will make
the sound unpleasant or distorted.
