Edirol F-1, Owner'S Manual

Page: 49 / 76

49
Configuration Settings
The Audio Level Meter on the Audio Level screen can display a temporary hold on the peak
level (Peak Hold Feature).
When the Peak Hold Feature is used, you can easily check the maximum audio level input
from the AUDIO IN connector.
1
Press the [MENU] button to access the Menu screen,
and select the “Peak Hold.”
Select the “Peak Hold” with the [ ( )] [ ( )] buttons,
and then press the [ (ENTER)] button.
2
Select the “ON” with the [ ( )] [ ( )] buttons.
3
Verify by pressing the [ (ENTER)] button.
When audio is captured (p. 14), a WAV file is created. The number of channels of the created
WAV file can be set to stereo or monaural.
1
Press the [MENU] button to access the Menu screen,
and select the “WAV Mode.”
Select the “WAV Mode” with the [ ( )] [ ( )]
buttons, and then press the [ (ENTER)] button.
2
Select the number of channels for the WAV file with the
[
( )] [ ( )] buttons.
3
Verify by pressing the [ (ENTER)] button.
Setting Peak Hold for the Audio Level Meter
Value Description
OFF Does not hold the peak.
ON Holds the peak.
Setting Stereo/Monaural for WAV Files
Value Description
Stereo Creates a stereo WAV file with an L and R
channel for the two channels.
The AUDIO IN connector CH3 is L and CH4 is R.
Mono X 2 Creates monaural WAV files for each channel.
F-1_v2_e.book 49 ページ ２００９年４月１７日 金曜日 午前１０時４７分