21
Panel Descriptions
Total Time
Timecode /
Timecode Mode (p. 48)
The timecode is displayed according to the “TimeCode Mode” setting (p. 48). During
capture, the displayed timecode is recorded within the video file.
Folder Name (p. 28, 34)
Displays the currently selected folder name. Material files are saved in the folder.
File Name (p. 28, 35)
Remaining Space in Removable Storage
Displays the remaining free space on the removable storage mounted on the F-1 unit.
* A low memory warning message is displayed when the remaining space on the removable
storage falls too low. If capture continues with low memory, the capture will stop eventually.
Icon Display
During Capture
Displays the elapsed time for capture.
During Standby/
Playback
Displays the length of the material currently selected.
During Capture/
Standby
: External
Displays the timecode of the device connected to the i.LINK connector.
* Displays “--:--:--:--” when no timecode is included in the input signal from the
i.LINK connector.
: Internal Rec Run
Displays the timecode internally generated by the F-1. Timecode will advance
only during capture.
: Internal Free Run
Displays the timecode internally generated by the F-1. When the F-1 is powered
up, timecode will advance regardless of operations performed.
During Playback
Displays the timecode of the material being played.
During Capture
Displays the file name of the material created after capture completes.
During Standby/
Playback
Displays the file name of the material currently selected.
(p. 46)
Recording mode during capture.
(None): Normal Rec
: Loop
Rec
: Pre
Rec
Type of material file being played.
: Video only
: Audio only
: Audio and video
(p. 52)
Material file playback mod.
: Single Repeat
:
Sequential
: Sequential Repeat
(p. 44)
Synchro Record On/Off.
(None): Off
: On
Power supply status.
: AC adaptor
: Battery (p. 24)
F-1_v2_e.book 21 ページ ２００９年４月１７日 金曜日 午前１０時４７分
