Select an application from the Popular
Applications selection. Once you have
selected an application, select a location (1-
10) in the
Copy to
selection box and then
click the
Copy to
button. This will
automatically list the Public Ports required for
this popular application in the location (1-10)
you’d specified.
Add Special Application
Fill in the "Trigger Port", "Trigger Type”,
“Public Port”, "Public Type", "Public Port" and
"Comment" of the setting to be added and
then click "Add". Then this Special Application
setting will be added into the "Current
Trigger-Port Table" below. If you find any typo
before adding it and want to retype again, just
click "Clear" and the fields will be cleared.
If you want to add a popular application,
select one “Popular Application” and then
click “Add”.
Remove Special Application If you want to remove some Special
Application settings from the " Current
Trigger-Port Table", select the Special
Application settings you want to remove in the
table and then click "Delete Selected". If you
want remove all Special Appliacation settings
from the table, just click "Delete All" button.
Click "Reset" will clear your current selections.
Click <
Apply>
at the bottom of the screen to save the above
configurations. You can now configure other advance sections or start
using the router (with the advance settings in place)
Example: Special Applications
If you need to run applications that require multiple connections, then
specify the port (outbound) normally associated with that application in the
"Trigger Port" field. Then select the protocol type (TCP or UDP) and enter
the public ports associated with the trigger port to open them up for
inbound traffic.
Example:
60
