Edit a QoS rule
Select the rule you want to edit and click “Edit”,
then you will enter the detail form of the QoS
rule. Click “Apply” after editing the form and the
rule will be saved.
Adjust QoS rule priority
You can select the rule and click “Move Up” to
make its priority higher. You also can select the
rule and click “Move Down” to make its priority
lower.
Edit QoS Rule:
You can assign packet classification criteria by its local IP range, remote IP
range, traffic type, protocol, local port range and remote port range
parameters. The parameters that you leave as blank will be ignored. The
priority of this rule will be applied to packets that match classification
criteria of this rule. You can limit bandwidth consumed by packets that
match this rule or guarantee bandwidth required by packets that match this
rule.
Parameters Description
Rule Name
The name of this rule.
51
