Parameter
Description
Enable Static Routing
Static Routing function is default disabled. You
have to enable the Static Routing function before
your routing rules take effect.
Destination LAN IP
The network address of destination LAN.
Subnet Mask
The subnet mask of destination LAN.
Default Gateway
The next stop gateway of the path toward the
destination LAN. This is the IP of the neighbor
router that this router should communicate with on
the path to the destination LAN.
Hop Count
The number of hops (routers) to pass through to
reach the destination LAN.
Interface
The interface that go to the next hop (router).
Add a Rule
Fill in the "Destination LAN IP", "Subnet Mask”,
“Default Gateway”, "Hop Count" and "Interface" of
the rule to be added and then click "Add". Then this
71
