Edimax PS-3207 Series, User Manual

Page: 65 / 158

57
se r vices b e fo re do ing th e follow in g BOOTP con figurat ion.
To r ebu ild the N IS map, ple ase r efer to your system
documentation.
To con fi gure the IP addre ss data for the BOOTP ser ve r,
you will need to log in the ho st of BOOTP ser ve r a s the
supe ruser (root). Per for m the followin g steps to add address
entrie s,
1. Optionall y, assign a name corre sponding to the
print ser ve r’ s IP add ress. You can add this addre ss to the
/etc/host s file, b y adding a lin e such a s:
203.66.191.12 pserver
2. Add an entr y to the ho st’ s / etc/bootptab file, similar
to the following:
hostname:\
:ht=1:\
:ha=print_server_ethernet_address:\
:ip=print_server_ip_address:
Lines should be ind ented with tab s.
Wher e hostna me is the device na me of a print ser ver,
the ht=1 tag sp ec ifie s the h ardware type is Ethernet, the
ha= tag sp ec ifies the Ethern et addr e ss o f a pr int ser ver,
which is the Node ID loc ated on the p rint server. The ha tag
mu st be preced ed b y the ht ta g. The ip = tag should
correspond to the IP addre ss you w ant to assign to the print
se r ver.