Edimax IC-3040IWT, User Manual

Page: 7 / 55

7
I-5. Reset
If you experience problems with your network camera, you can reset the
camera back to its factory default settings. This resets
all settings back to
default.
1.
Press and hold the WPS button found on the back panel for at least 10
seconds
2.
Release the button when the orange LED is flashing quickly.
3.
Wait for the network camera to restart. The camera is ready when the
green LED is on or flashing .
After reset, the LED will display off If there is no Ethernet
connection to the network camera from a router/access
point/switch.