Edimax IC-3040IWT, User Manual

Page: 26 / 55

26
IV-1-2-3. WPS
WPS (Wi-Fi Protected Setup) is a quick and easy way to set up wireless
connections between compatible devices. Use the “Start PBC” or “Start PIN”
button to activate WPS on your network camera. Your network camera’s WPS
PIN code is also listed next to “Self PinCode”.
Self PinCode Your network camera’s WPS PIN code is listed
here.
Access PBC Mode Click “Start PBC” to activate push-button WPS
on your network camera. This has the same
effect as physically pushing the built-in
hardware WPS button.
Configure via
PinCode Enter the SSID you wish to connect to and
click “Start PIN” to activate PIN code WPS.
You will then need to enter the network
camera’s “Self PinCode” into your wireless
router’s web U.I. and activate your router’s
PIN code WPS.
Please refer to your wireless router’s instructions for help
accessing its web-based interface and activating WPS.