5
II-2.
Connection
1.
Power on
: Connect the power cord to the switch and the power outlet.
The switch is powered by the 100-240VAC 50/60Hz external high-
performance power supply. (Note: Make sure the PWR LED is green.)
2.
Uplink
: Plug the standard Cat5e(or above) Ethernet cable into the LAN
port no. 9 or plug the SFP cable into the SFP slot and connect it to the LAN
server or core switch. (Note: Make sure that the LED is green or amber.)
3.
Connect devices
: Plug the standard Cat5e(or above) Ethernet cable into
the LAN port and connect to any networking device with an Ethernet port.
(Note: Make sure that the "LAN" LED is green or amber.) The hardware
installation is complete!
4.
Connect a computer
: Connect your computer with the switch and get
ready for web-based configuration with following
＂
Section III
Web-based Configuration Utility
＂
.
1.
Power on
3. Connect devices
2.
Uplink to the server
or core switch
4. Connect to
a computer
