16
By default, the Switch uses the MAC SA & DA
distribution type.
MAC SA & DA: To distribute traffic based on a
combination of the packet’s source MAC address
and destination MAC address.
MAC SA: To distribute traffic based on the packet’s
source MAC address.
MAC DA: To distribute traffic based on the packet’s
destination MAC address.
Link Group
Activity
Switch TX LACP control packet Passive or Active.
By default, the Switch uses the Passive mode.
Link Group
Member
The check box of ports would be checked after the
port is added into the Link Group successfully.
Apply
Click Apply to save your changes.
IV-7.
Mirror
Port mirroring selects the network traffic for analysis by a network analyzer.
This is done for specific ports of the switch. You may configure the ports as
source ports or configure one of the ports is as a destination port.
Item
Description
Enable Mirror
Enable/disable port mirroring.
Mirror Direction
Select the mirror direction:
Both( Ingress and Egress)
Ingress
Egress
