8
Edimax Technology (UK) Limited | Using 2 units of EW-7303APn v2
www.edimax.co.uk
Then, continue the configuration. Click Wireless Settings> Basic>change Wireless
Mode to
Repeater
.
You can change the
SSID.
This SSID is the wireless network name of the 2
nd
EW-
7303APn v2
.
We recommend you to use a
different SSID
so that you can identify the
1
st
and 2
nd
unit. However (if you wish), you can use the same SSID in both EW-
7303APn v2 as long as you are not confused. Click Apply and click ‘Reboot later’.
After that you will see a
Site Survey
option under Wireless Settings> Click Site
Survey>you will see the Site Survey table.
On the table, you will see all wireless networks available in the environment> choose
the 1
st
EW-7303APn v2 you want to repeat from. Check the signal strength (RSSI),
make sure it’s on 50% or above. Please note that if the signal strength is lower than
50%, the repeater won’t be connected. Click Next.
