6
Edimax Technology (UK) Limited | Using 2 units of EW-7303APn v2
www.edimax.co.uk
Then, select Reboot Now.
After rebooted, configuration of the 1
st
EW-7303APn v2 is done.
2)
For the
2
nd
EW-7303APn v2 (at Building 2, 2
nd
unit),
set it up using repeater mode.
Connect a computer (use a standalone computer, do not connect this computer to
any other network while setting this up) to the LAN port of EW-7303APn v2 using an
Ethernet cable. Do not connect EW-7303APn v2 to any other devices/router.
Change the IP address of the 2
nd
EW-7303APn v2 from 192.168.2.1 to 192.168.2.2, so
that it won’t cause conflict with the 1
st
unit. To do this, login to EW-7303APn v2 on
192.168.2.1. Open the Internet Explorer, at the address bar, type 192.168.2.1 and
press Enter. Login with default username/password, admin/1234. Once login, click
Internet Settings>LAN>
change IP address to 192.168.2.2, Click Apply to save the
setting.
