background image

PRODUCT INTRODUCTION 

 

Model no.: 
 

ES-1008PHE: 8-Port Fast Ethernet Switch with 4 PoE Ports 
 
GS-1008PHE: 8-Port Gigabit Ethernet Switch with 4 PoE Ports 
 

Package Contents 
 

Before you start using this router, please check if there is anything missing 
in the package, and contact your dealer to claim the missing item(s): 
 

 

PoE switch x 1pcs 

 

Quick installation guide x 1pcs 

 

Power adaptor x 1pcs 

 

Power cord x 1pcs 

 

Rubber feet x 4pcs 

 

Terminal Block x 1pcs 
 

Safety Precautions 
 

To avoid any device damage and bodily injury caused by improper use, 
please observe the following rules. 
 
*Keep the power off during the installation. 
*Wear an ESD-preventive wrist strap, and make sure that the wrist strap 

has a good skin contact and is well grounded. 

*Use only the power cord provided with the Switch. 
*Make sure that the supply voltage matches the specifications indicated 

on the rear panel of the Switch. 

*Ensure the vent hole is well ventilated and unblocked. 
*Do not open or remove the cover of the Switch. 
*Before cleaning the device, cut off the power supply. Do not clean it by 

the waterish cloth, and never use any other liquid cleaning method. 

 
 
 
 
 

Summary of Contents for ES-1008PHE













Reviews: