Edimax CAX1800 User Manual Download Page 61

Page: 61 / 259

Select “Edit” to edit the username and password of the RADIUS account:

User Name

Enter the user names here, separated by commas.

Add

Click “Add” to add the user to the user registration list.

Reset

Clear text from the user name box.

Select

Check the box to select a user.

User Name

Displays the user name.

Password

Displays if specified user name has a password (configured) or
not (not configured).

Customize

Click “Edit” to open a new field to set/edit a password for the
specified user name.

Delete
Selected

Delete selected user from the user registration list.

Delete All

Delete all users from the user registration list.

Summary of Contents for CAX1800




































































































































































































































































Search results

Summary of Contents for CAX1800

Reviews:

Related manuals for CAX1800

Brands by name

Popular brands

Edimax CAX1800, User Manual

Search results

Summary of Contents for CAX1800

Reviews:

Related manuals for CAX1800

Brands by name

Popular brands