Edimax CAP1750, User Manual

Page: 146 / 254

Edimax Pro NMS
140
channel setting will check/reassign the
wireless channel. Check/uncheck the “Change
channel even if clients are connected” box
according to your preference.
Channel Bandwidth Set the channel bandwidth or use Auto
(automatically select based on interference
level).
BSS BasicRateSet Set a Basic Service Set (BSS) rate: this is a
series of rates to control communication
frames for wireless clients.
These settings are for experienced users only. Please do not change any of the
values on this page unless you are already familiar with these functions.
Changing these settings can adversely affect the performance of
your access points.
Advanced Settings
Contention Slot Select “Short” or “Long” – this value is used for
contention windows in WMM (see
IV-6-7.
WMM ).
Preamble Type Set the wireless radio preamble type. The
preamble type in 802.11 based wireless
communication defines the length of the CRC
(Cyclic Redundancy Check) block for
communication between the access point and
roaming wireless adapters. The default value is
“Short Preamble”.
Guard Interval Set the guard interval. A shorter interval can
improve performance.
802.11g Protection Enable/disable 802.11g protection, which
increases reliability but reduces bandwidth
(clients will send Request to Send (RTS) to
access point, and access point will broadcast
Clear to Send (CTS), before a packet is sent
from client.)