44
The following table describes the parameters in this page:
Field
Description
VPI
Virtual path identifier (VPI) is the virtual path between two
points in an ATM network. Its valid value is between 0 and
255. Enter the correct VPI provided by your ISP. By default,
VPI is set to
8
.
VCI
Virtual channel identifier (VCI) is the virtual channel between
two points in an ATM network. Its valid value is between 1
and 65535. Enter the correct VCI provided by your ISP. By
default, VCI is set to
35
.
Connection
Type
You can select
LLC
or
VC-Mux
. In this example, the
encapsulation mode is set to
1483 Bridged IP LLC
.
5.3.3.
Dynamic IP Address
For configuration method, please refer to that of Auto setup
by ISP list
Select
Auto setup by ISP list
, click
NEXT
, and the page as shown in the
following figure appears.
