43
You may select
Auto setup by ISP list
,
Dynamic IP Address, Static IP Address,
PPPoE/PPPoA
or
Bridge Mode
.
5.3.1.
Auto setup by ISP list
Select
Auto setup by ISP list
, click
NEXT
, and the page as shown in the
following figure appears.
The following table describes the parameters in this page:
Field
Description
Country
Select the country you are in.
ISP
Select your Internet Service Provider (ISP).
VPI
Virtual path identifier (VPI) is the virtual path between two
points in an ATM network. Its valid value is between 0 and
255. Enter the correct VPI provided by your ISP.
VCI
Virtual channel identifier (VCI) is the virtual channel between
two points in an ATM network. Its valid value is between 1
and 65535. Enter the correct VCI provided by your ISP.
Connection
Type
Select a connection type from the dropdown list. You may
select PPPoE/ PPPoA/ Dynamic IP/ Static IP/ Routered IP/
Bridge.
5.3.2.
Bridge Mode
Select
Bridge Mode
, click
NEXT
, and the page shown in the following figure
will appear.
