36
2-4-6 Using “L2TP” as broadband connection type
1.
Select “L2TP” if your ISP is providing you Internet access via L2TP (Layer-2
Tunneling Protocol).
2.
If your ISP is providing you dynamic IP addresses, select “Obtain an IP address
automatically” (refer to 2-4-1 for setup details). If your ISP is providing you a static
IP address, select “Use the following IP address” (refer to 2-4-2 for setup details).
NOTE: These settings must be configured according to your Internet service. Please
contact your Internet service provider if you are not sure what to select.
3.
Configure the “L2TP Settings” section.
