34
2-4-5 Using “PPTP” as broadband connection type
1.
Select “PPTP” if your ISP is providing you Internet access via PPTP (Point-to-Point
Tunneling Protocol).
2.
If your ISP is providing you dynamic IP addresses, select “Obtain an IP address
automatically” (refer to 2-4-1 for setup details). If your ISP is providing you a static
IP address, select “Use the following IP address” (refer to 2-4-2 for setup details).
NOTE: These settings must be configured according to your Internet service. Please
contact your Internet service provider if you are not sure what to select.
3.
Configure the “PPTP Settings” section.
