Edimax 3G-6200nL, Manual

Page: 76 / 152

76
3-3 LAN (Wired)
You can setup Wired LAN (Local Area Network) connections of this
broadband router in ‘LAN’ menu. Please also note that both wired and
wireless LAN uses the same LAN IP address settings, too.
LAN settings split into 3 sections: LAN IP, DHCP Server, and Static
DHCP leases. Please refer to corresponding sections below for detailed
setup instructions.
3-3-1 Start
Before you start - Suggestions for deciding an IP address to be used with
this broadband router
Before all computers using wired Ethernet connection or wireless
connection can communicate with each other and access internet, they
must have a valid IP address.
There are two ways to assign IP addresses to computers: static IP address
(set the IP address for every computer manually), and dynamic IP address
(IP address of computers will be assigned by router automatically. It’s
recommended for most of computers to use dynamic IP address, it will
save a lot of time on setting IP addresses for every computer, especially
when there are a lot of computers in your network; for servers and
network devices which will provide services to other computer and users
that come from Internet, static IP address should be used, so other
computes can locate the server.
This broadband router has a built-in DHCP (Dynamic Host Configuration
Protocol) server, and can help you to assign IP addresses to your client
computers. Almost all network computers / devices manufactured after
year 1995 are compatible with DHCP, and you can let this broadband
router to assign the IP address to client computers / devices for you.