132
Add
Add the mapping to port forwarding table.
Reset
Remove all inputted values.
NOTE: Please note that every public IP address can be mapped to a single
Client PC IP address only.
All existing DMZ entries will be displayed in ‘Current DMZ Table’:
If you want to delete a specific DMZ entry, check the ‘select’ box of the
DMZ entry you want to delete, then click ‘Delete Selected’ button. (You
can select more than one DMZ entries). If you want to delete all DMZ
entries listed here, please click ‘Delete All’ button or you can also click
‘Reset’ button to unselect all DMZ entries.
When you finished with the settings in this page, you can click ‘Apply’
button to save changes you made in this page, or you can click ‘Cancel’
to discard changes. After you click ‘Apply’ button, you’ll see the
following messages:
Please click ‘Apply’ to save changes you made and restart the broadband
router, this requires about 30 seconds and the broadband router will stop
responding (this is normal and is not malfunction). You can reconnect to
this broadband router and continue on other settings later.
Summary of Contents for 3G-6200nL
