Edimax 3G-6200nL, Manual

Page: 60 / 152

60
3-2-1 3G/3.5G
3G-6200nL supports most of 3G/3.5G modem cards, just connect the
modem card to the USB port of 3G-6200nL and 3G-6200nL will
recognize it automatically, no additional setup procedure required.
However, some of modem cards require PIN code or account / password
(you have to use 3G-6200nL’s web interface to input these information),
and some modem cards requires you to connect the modem card with
your PC and install driver / utility before you connect it with 3G-6200nL
(all PCs which need to access Internet by 3G-6200nL requires to perform
this procedure once). If you still not able to connect to Internet, please use
wired Internet connection to access our website :
http://www.edimax.com/ ,download latest version of firmware and
upgrade 3G-6200nL’s firmware. If you still not be able to get connected
by your 3G/3.5G modem card, please contact your dealer of purchase and
provide the model name of the 3G/3.5G modem card you have, we’ll try
our best to help you to solve the problem.
Only one Internet connection (wireless / wired) can be used at the same
time. Wireless connection (3G/3.5G) will be selected first, and use wired
Internet connection as backup. Therefore, please DO NOT connect your
3G/3.5G modem card with 3G-6200nL, or your telecomm service
provider may charge you with high communication fee. For example, if
you connect 3G/3.5G modem card with 3G-6200nL when you’re using
wired Internet connection, wired connection will be dropped and use
3G/3.5G wireless connection instead. If 3G/3.5G wireless signal
reception is poor and the connection can not be restored within 60
seconds, 3G-6200nL will use wired Internet connection again, and will
not switch back to wireless Internet connection (This only happens with
wired Internet connection is available. If wired connection is unavailable,
3G-6200nL will try to establish 3G/3.5G wireless connection again and
again). If you want to use 3G/3.5G wireless connection again, you need
to remove 3G/3.5G modem card from 3G-6200nL and reconnect it back
after 5 seconds.
( A ) Plug and play, no setup procedure required.
Connect the USB 3G/3.5G modem card with 3G-6200nL and make sure
the corresponding USB LED indicator of 3G-6200nL lights up, then you
can use the web browser to access Internet.
( B ) PIN code or user name / password required:
Please check the authentication method you want to use. Most of
telecomm service providers require you to input PIN Code, please check