26
ENGLISH
USER INSTRUCTIONS
- Relax function
Natural convection function (without ventilation) with
automatic power limiting.
This function is available in all modes: automatic,
manual and crono.
Hold down the “M” button for two seconds to activate
the Relax function.
The display reads the symbol, as shown below.
Hold it down again to deactivate it.
The product reduces its power output and after a few
minutes switches the fan off too.
Pressing OK or “+” or “-” in this mode has no effect.
Menu
Press the “M” button to display the menu.
When the menu displays, the buttons have the
following functions:
“+” : scroll up
“-” : scroll down
press and release “OK”: enter menu option
press and release “M”: quit menu option
Press the ON/OFF button to confirm and return to the
main screen.
- Stand by
When the Stand by function is active, in automatic
and crono modes, the product shuts off when the
temperature setpoint is reached and turns on again
when the room temperature drops.
When the Stand By function is not active, the product
sets itself to minimum power when the temperature
setpoint is reached.
To access the function from the main menu (as
indicated in the Menu section above), press the M
button. Scroll using the +/- buttons and select the
function by pressing the “OK” button.
Use the “+/-” buttons to select OFF or ON.
To exit without saving, press the “M” button
If you selected ON, the display shows the minutes for
which the product will continue running at minimum
power even when the temperature setpoint has been
reached.
Use the “+/-” buttons to increase or decrease this time
in minutes.
Press “OK” for two seconds to confirm and return to
the previous menu level.
Press the ON/OFF button to return to the main screen.
The product is programmed by default with
a delta of +/- 1 °C to optimise comfort.
The technician can change this setting
during commissioning to suit the needs of
the application.
The display shows the temperature
rounded down. This means that 20.1°C and
20.9°C are indicated as “20°C”.
E.g., with the room temperature set to
20°C, the product will enter modulation
mode/switch off when a temperature of 21°
C is reached and will switch on again below
19° C.
PELLET LOAD
STAND BY
CRONO
NIGHT
DATE-TIME
DISPLAY
LANGUAGE
BEEP
INFO
TECHNICAL MENU
PELLET LOAD
STAND BY
CRONO
NIGHT
DATE-TIME
DISPLAY
LANGUAGE
BEEP
INFO
TECHNICAL MENU
USER
