16
ENGLISH
VYDA - CLADDING
INSTALLER
1. Open the combustion chamber door with the
protective lever (removable handle P) and undo two
screws to remove “aesthetic cover”.
2. Undo the screws (B). Insert the ceramic or stone
front panel
(1)
in the metal support above the door
It is snapped into position on the side parts and
screwed on the top part.
Fitting of the stone or ceramic front panel above
the door (1)
To make alignment adjustments between ceramic/
stone and the door, you can use the screws A and B
Screw A can be used to adjust “backwards/forwards”
Screw B can be used to adjust the inclination.
A
B
1
aesthetic
cover
2
1
P
THE DRAWINGS ARE FOR GUIDANCE ONLY,
USEFUL FOR THE INSTALLATION, BUT THEY
MAY NOT REFER TO THE SPECIFIC MODEL.
If necessary, you can bend the “brackets” using a flat
screwdriver.
