manualshive.com logo in svg

EdilKamin PHOENIX 1115620, Manual, Page: 25 / 28

Share
Download
EdilKamin PHOENIX 1115620 Manual Download Page 25

25

ENGLISH

TROUBLESHOOTING

MESSAGE

PROBLEM

SOLUTION

HO7

Shut-down due to exceeding 
maximum fumes temperature.

•  Check the type of pellet (contact the technician if in 

doubt)

•  Contact the technician

H08

Shutdown due to excessive 
overheating of the product.

• See 

HO7

H09

Shutdown due to gearmotor fail-
ure.

•  Contact the technician

H10

Switching OFF due to circuit 
board overheating.

•  Contact the technician

H11

Switching OFF due to the inter-
vention of the safety pressure 
switch.

•  Ensure the product and flue are clean 
•  Contact the technician

H12

Room temperature probe 
failure. The product is operating 
in manual mode.

•  Contact the technician

USER/INSTALLER

MESSAGES WHICH DO NOT SHUT THE STOVE DOWN, BUT ARE SIMPLY WARNINGS 

LOW REMOTE CONTROL BATTERY LEVEL:

The battery symbol displays on the remote control display if the battery is low. 

MAINTENANCE:

A spanner symbol will appear on the display after 2,000 hours of operation.
The product is working, but it must be serviced by an authorised Edilkamin technician.

Summary of Contents for PHOENIX 1115620





























Reviews:

No comments