22
ENGLISH
I
DESCRIPTION OF THE DISPLAY
THE READING AREA OF THE DISPLAY
is
divided in two parts:
• the status bar
, above the horizontal line;
• main
area
, under the horizontal line.
The views display the functions and are described in
the following sections
The status bar
contains:
• the symbols of the heat request (radiator, tap,
pump activation);
• the current time
Example of domestic hot water request
The main area
contains:
• the room temperature*
• the operating power of the product (from 1
upwards), which is represented by the flame
symbols
• the fan speed, which is represented by the filled
blades symbol (if absent, the fan is off).
SIMPLIFIED USE after first ignition
In default mode, with the product connected to the power supply, press the ON/OFF button on
the display to “activate” the boiler stove and adjust the desired room temperature with the +/-
buttons. The boiler stove will switch on and off and will adjust its power automatically to keep the
set temperature.
By pressing the “M” button you access the Menu screen
* The product is programmed by default with a delta of +/- 1 °C to
optimise comfort.
The technician can change this setting during commissioning to suit
the needs of the application.
The display shows the temperature rounded down. This means that
20.1°C and 20.9°C are indicated as “20°”.
E.g., with the room temperature set to 20° C, the product will enter
modulation mode/switch off when a temperature of 21° C is reached
and will switch on again below 19° C.
Tap
Current time
Room temperature
Power indication
18°
If you are using a room thermostat instead of the room
probe provided as standard, the display will appear as
below. The heat demand is indicated by the radiator
symbol.