EdilKamin CHERIE UP H, Installation, Use And Maintenance Manual

Page: 9 / 60

9
ENGLISH
Description Reference in
Figures Quantity
Side panel (bottom right or top left) (1) 2
Side panel (bottom left or top right) (2) 2
Brackets for fitting the side panels
and small parts (3) brackets for the side panels (2 per side panel)
washers, nuts, M5 screws 4 M5 toothed washers for side
panels
20 M6 screws and M6 toothed washers for front panel
Bottom front panel (4) 1
Cast iron top (5) 1
1. Remove the pellet tank cover
Loosen the wing screws underneath and remove the pellet tank cover by pulling it towards the front. This will
subsequently enable you to position the top and screw on the side panels.
2. Assembling and fitting the side panels onto the structure
On each of the sides, undo the metal support screws, unhook the metal support and remove it.
wing screws
screws for fitting the metal supports
metal
support
STEEL CLADDING
INSTALLER