20
ENGLISH
To hook the fans up to the controller board,
refer to the paragraph above
POSITION OF THE FAN IN THE KIT
This is a standard fan with upper vent and ready for
use to the right of the product.
If you want to position it to the left of the product, the
installer must rotate it by 180 °C.
Summary of the operations shown in the diagram
below (fig. 7):
1. press down to open the door
2. remove the screws
3. remove the cover panel
4. rotate the fan, taking care with the cables to be
extracted
5. reinsert the fan
6. repeat the operations to reattach the door and ro-
tate the box.
Positioning of the Fan Kit.
Prepare a hole (H190 x L200) on the wall to house the
fan kit.
Insert the kit from the inside, then tighten the screws to
attach it, leaving the covering open.
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
Only work on electrical parts when
disconnected from the electrical power
source.
DUCTED VENTILATION
VERSIONS WITH DUCTED VENTILATION (1/4)