EDIFIER Hecate G1000, User Manual

Page: 2 / 57

EN Important safety instruction
• Please read the instructions carefully. Keep it in safe place for future reference.
• Use only accessories approved by the manufacturer.
• Install the instrument properly by following the instructions in the device connection section.
• Using the product in a 0-35°C environment is recommended.
Shipping and storing the product in a 0-35°C environment is recommended.
• To reduce the risk of fire and electric shock, do not expose the product to rain or moisture.
• Do not use this product near water. Do not immerge the product into any liquid or have it exposed to
dripping or splashing.
• Do not install or use this product near any heat source (e.g. radiator, heater, stove, or other devices that
generate heat).
• Do not place any object filled with liquids, such as vases on the product; neither should any open fire,
such as lighted candles be placed on the product.
• Do not block any ventilation openings. Do not insert any object into ventilation openings or slots. It
may cause fire or electric shock.
• Keep sufficient clearance around the product to maintain good ventilation (minimum 5cm is
recommended).
• Do not force a plug into the jack. Before connection, check for blockage in the jack and whether the
plug matches the jack and is oriented to the right direction.
• Keep the provided accessories and parts (such as screws) away from children to prevent from being
swallowed by mistake.
• Do not open or remove the housing yourself. It may expose you to dangerous voltage or other
hazardous risks. Regardless the cause of damage (such as damaged wire or plug, exposure to liquid
splash or foreign object falling in, exposure to rain or moisture, product not working or being dropped,
etc.), the repair has to be performed by an authorized service professional immediately.
• Before cleaning the product with dry cloth, always turn off the product and disconnect the power plug
first.
• Never use strong acid, alkali, gasoline, alcohol, or other chemical solvents to clean the product surface.
Use only neutral solvent or clear water for cleaning.
• The product must be used at an altitude of lower than 2000m.