EDI TSG-416, Service Manual

Page: 55 / 228

TSG ‐ 416 ENGINE
02 ‐ 11
Camshaft- Removal
NOTE:
Store components to ensure assembly in the
same order as they were removed.
1. Remove valve cover -- Refer to “Valve Cover -
Removal” on page 10.
2. Using tool 15-030A to lock camshaft sprocket,
remove bolt.
CAUTION: During camshaft removal, the camshaft
sprocket and chain must remain engaged and the
chain tensioned in order to keep timing links
aligned. If chain is allowed to slacken or disengage
with sprocket, the oil pump will have to be removed,
and the timing chain realigned - refer to timing chain
assembly xxx.
3. Separate camshaft sprocket and chain from
camshaft while maintaining tension on the chain.
4. Remove bolts and camshaft bearing caps evenly
in the sequence shown.
5. Remove camshaft, lower bearings, roller
followers and lash adjusters.
Refer to Section 01 for camshaft and bearing service.