6400LF Converged Network Appliance Installation Guide
26
Install Chassis in Rack
CAUTION
Lifting the chassis and attaching it to the rack is a two-person job. If needed, use an
appropriate lifting device. A fully loaded SR1400 server weighs about 13.9 kg (30.6 lbs.) and a
fully loaded SR2400 server weighs about 23.4 kg (51.5 lbs.).
1. Locate one person at the front of the rack and one at the rear.
2. Position the chassis so that the L brackets (Figure 17, A) are inserted into the chassis
mounting brackets (B).
3. While supporting the weight of the chassis, adjust the L brackets to fit tightly into the
chassis brackets (C).
Figure 16: L Brackets Inserted into Chassis Mounting Brackets (Rear View)
4. Slide the chassis toward the rear of the rack until the front of the chassis brackets
contact the front of the center posts.
5. Using the fasteners (Figure 18, C) supplied with your rack, attach the front of the
mounting brackets to the front of the center posts.
