EdgeMarc 4800 Hardware Installation Guide
18
© 2016 Edgewater Networks. All Rights Reserved.
Installing the EdgeMarc 4800 in a Rack
Install the EdgeMarc in a 19” rack using the rack mount kit supplied with
the device.
Before You Begin
Before installing the EdgeMarc in a rack, take note of the following
conditions:
Elevated Operating Ambient
—If installed in a closed or multi-unit rack
assembly, the operating ambient temperature of the rack environment may
be greater than room ambient. Therefore, consideration should be given to
installing the equipment in an environment compatible with the maximum
ambient temperature specified by the manufacturer.
Reduced Air Flow
—Installation of the equipment in a rack should be such
that the amount of airflow required for safe operation of the equipment is
not compromised.
Mechanical Loading
—Mounting of the equipment in the rack should be
such that a hazardous condition is not achieved due to uneven mechanical
loading.
Circuit Overloading
—Consideration should be given to the connection of
the equipment to the supply circuit and the effect that overloading of the
circuits might have on overcurrent protection and supply wiring.
