6
Warning: Use two or more people to move and install the outdoor beverage refrigerator.
Failure to do so can result in back or other injury. Carefully remove the packaging materials.
Remove any shipping tape and glue from your outdoor beverage refrigerator before use. Do
not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove
tape or glue. These products can damage the surface of your outdoor beverage refrigerator.
Important: Do not remove any safety, warning, or product information labels from your outdoor
beverage refrigerator.
Internal Fan
This unit is equipped with an internal fan that maintains a consistent internal temperature.
Installing the Outdoor Beverage Refrigerator
The outdoor beverage refrigerator should be installed in accordance with local electrical code
requirements. The refrigerator should also be placed in a location that is strong enough to
support its total weight, keeping in mind that it will weigh substantially more when fully loaded
than when empty.
Before you plug the beverage refrigerator into a power supply, be sure
to let it stand upright for at least 24 hours to allow the compressor’s oils to settle.
Unpacking the Outdoor Beverage Refrigerator
Types of Installation
This outdoor beverage refrigerator has been designed for freestanding or built-in installation. In
each case, there must be adequate ventilation and access for service.
Freestanding Installation:
A freestanding installation will allow you to install the outdoor beverage refrigerator in almost
any place you desire. You must follow the stated instructions for electrical requirements, and
leveling the outdoor beverage refrigerator.
Built-in Installation:
A recessed installation will allow you to install the beverage cooler under a counter or in a
kitchen cabinet provided the required clearance space around the beverage cooler is
fulfilled. It is necessary to allow adequate ventilation space around the unit, including the
back. The following additional items must be observed:
1.
Place the outdoor beverage refrigerator in front of the installation location. Adjust the
feet and place the unit flat on the floor or on a platform depending on your installation
requirements.
2.
If the electrical outlet for the outdoor beverage refrigerator is behind the cabinet, plug
in the outdoor beverage refrigerator.
3.
Push the outdoor beverage refrigerator into position.
Warning: Do NOT install the outdoor beverage refrigerator behind a closed cabinet door.
