background image

 

 
Important Safety Information 

 

 

Improper handling can cause serious damage to the EdgeStar outdoor beverage refrigerator 
and / or injury to the user. This outdoor beverage refrigerator is designed for domestic indoor 
use only. 

Do not use the unit for industrial or commercial use.

  Any other use may 

invalidate the warranty. Please review the ratings label located on the rear panel of the unit for 
electrical and other technical data related to this unit. The unit must be used in a properly 
grounded wall outlet.  

 

Please read and follow the safety information listed below to reduce the risk of fire, 
electric shock, or injury.

  

 
 
 

 

 Electrical Safety 

 

  This unit must be protected from the elements such as dirt, dust, sand, rain, sleet, snow, and / or 

moisture. 

  Do not exceed the power outlet ratings.  

  It is recommended the refrigerator be connected on its own circuit.  

  The unit must be installed in accordance with state and local electrical codes.  

  A standard electrical supply (115 V, 60Hz), that is properly grounded in accordance with the 

National Electrical Code and local codes and ordinances is required.   

  Use outlets that cannot be turned off by a switch or pull chain. 

  Unplug the unit if you are going to clean it or when it is not going to be used for an extended period 

of time.  

  Do not operate the unit with a power plug missing the ground plug, a damaged cord, or a loose 

socket. If the power cord is damaged, it must be replaced by the manufacturer or a qualified 
technician. 

  Be sure the outdoor beverage refrigerator is properly grounded. 

  Never plug or unplug the unit with wet hands. 

  Do not bypass, cut, or remove the grounding plug.  

  Do not use extension cords or power strips with this unit. You may need to contact your electrician if 

it is necessary to use a longer cord or if you do not have a grounded outlet. Do not modify the 
power cord’s length or share the outlet with other appliances.  

 

Do not start or stop the unit by switching the circuit’s power on and off. 

  Never repair the unit while it is plugged in. 

  Immediately unplug the unit if it makes strange sounds, emits smells, or smoke comes out of it, and 

contact customer service. 

  Do not remove any part of the casing unless you are instructed to do so by an authorized 

technician. 

  You should never attempt to repair the unit yourself. 

  Contact customer service for service options if the unit needs service. 

Summary of Contents for OBR901SS



















Reviews: