5
5. Remove the lower door hinge from the right side.
Remove the three screws that are used to fix the
bottom grille with cabinet then install the three
screws at the designated position at the right side.
6. Install the lower door hinge to the designated
position at the left side.
7. Install the lower hinge supporter together with the
bush to the designated position.
8. Locate and press the glass door up into the upper
hinge pivot and install the two lock screws to connect
the lower hinge with the glass door and tighten them
before the door is leveled.Then remove the handle
from the left side and install it on the right side of the
door.
5. HOW TO ATTACHING THE DOOR HANDLE
1. Pull away the door gasket
○
a around the area where the handle is to be installed.(
AS INDICATED IN
ILLUSTRATION 1
)
NOTE: The gasket is easily displaced by hand ,no tools are necessary.
2. Using a “
一
” type head screwdriver remove the two pre-installed decorative plugs
○
b from the back of door.
Some wine cellar items have no decorative plugs. (
AS INDICATED IN ILLUSTRATION 1
)
NOTE: Save the decorative plugs for future use
.
3. Insert the two “+” type head screws
○
c with the lock washers
○
d and flat washers
○
e through the gasket side
of the door frame until the screws pass right through the door. (
AS INDICATED IN ILLUSTRATION 2
)
4. Align the handle
○
f with the screws and tighten using a “+” type head screwdriver until the handle sets flush
against the door frame. (
AS INDICATED IN ILLUSTRATION 2
)
NOTE: Do not overtighten as this will cause damage to the handle assembly.
5. Replace the door gasket to its original position.