14
REMEDY
:
1>. Replace the door gasket or close the door well. If the door gasket is slightly not air-proof, it can be repaired
by the heat dryer.Aiming at the distortion of the gasket with the heat dryer, and move up and down until it
expand to the normal state. When it is cool, check it with the door closed, if there is any distortion, dry it
again until it fix for the door.
2 >.If the fan is Jamed seriously or breacken, replace it with the new fan.
9. DESCRIPTION OF CONTROL PCB & POWER PCB
CONTROL PCB
1
．
To Evaporator Fan Motor(Red)
2
．
To Lower Zone Fan Motor(Yellow)
3
．
To PTC Heater Fan Motor(White)
4
．
To Upper Zone Sensor(Yellow)
5
．
To Lower Zone Sensor(White)
6
．
To Defrost Sensor(Red)
7
．
To LED Light Assembly
8
．
To Power PCB
9
．
To Display PCB
POWER PCB
1. To Trasformer Input L,N
2. To Power L,N
3. To Trasformer Output
4. To Condenser Fan Motor
5. To PTC Heater
6. To Compressor
7. To Control PCB