5
Electrical Requirements
Before you move your wine and beverage cooler into its final location, it is
important to make sure you have the proper electrical connection:
A standard electrical supply (115 V, 60Hz), properly grounded in
accordance with the National Electrical Code and local codes and
ordinances, is required.
It is recommended that a separate circuit, serving only your wine and
beverage cooler, be provided. Use receptacles that cannot be turned off
by a switch or pull chain.
The fuse (or circuit breaker) size should be 3 Amps.
Recommended grounding method
For your personal safety, this appliance must be grounded. It is equipped
with a power supply cord having a 3-prong grounding plug. To minimize
possible shock hazard, the cord must be plugged into a mating 3-pronged
wall socket, and grounded in accordance with the National Electrical
Code and local codes and ordinances. If a mating wall socket is not
available, it is the personal responsibility of the customer to have a
properly grounded, 3-prong wall receptacle installed by a qualified
electrician.
Leveling the Wine and Beverage Cooler
It is important for the wine and beverage cooler to be leveled in order to
work properly. It can be rsaised or lowered by rotating the plastic sheaths
around each of the front two feet on the bottom of the machine. If you find
that the surface is not level, rotate the feet until the wine and beverage
cooler becomes level .You may need to make several adjustments to
level it. We recommend using a carpenter’s level to check the machine.
1.
Place a carpenter’s level on top of the product to see if the wine and
beverage cooler is level from front to back and side to side.
2. Adjust the height of the feet as follows:
Turn the leveling feet clockwise to lower that side of the cooler.
Turn the leveling feet counterclockwise to raise that side of the wine and
beverage cooler.
IMPORTANT: Once you are ready to install it in a cabinet or directly on
the floor, you must adjust the front feet to level the wine and beverage
cooler.
ELECTRIC SHOCK HAZARD!
Plug into a grounded 3-prong outlet.
Never remove the grounding prong from the plug.
Never use an adapter to bypass the grounding prong.
DO NOT use an extension cord.
Failure to follow these instructions can result in fire,
electrical shock, or death.
