EdgeStar BR3002BL, Owner'S Manual

Page: 12 / 22

7
Using the Temperature Control Panel
This kegerator has an electronic control panel located on the top of the exterior of the cabinet.
This kegerator has a cooling range of 32-50°F (0-10°C).
Press the
Cooler or Warmer buttons to adjust temperature by 1°.
Press the
F/C button to switch between degrees Fahrenheit and Celsius.
Press
Deep Chill to activate the quick cooling feature of this kegerator. Press the button again
to exit Deep Chill mode. Deep Chill should be used to quickly cool a warm kegerator. The
machine will operate continuously for 24 hours and exit this mode after 24 hours. Only use this
mode when cooling a warm keg.
Error Codes

E1: Temperature sensor failure in the refrigerated zone.

E4: Defrosting sensor failure in refrigerator compartment.

E7: Ambient temperature sensor fault.
Note: Whether your kegerator can reach cooler temperature depends on the ambient
environmental conditions.
Caution: If you powered off the unit, please wait at least 5 minutes before powering it back
on.