EdgeStar BR3002BL, Owner'S Manual

Page: 11 / 22

6
Important: Please ensure the kegerator is level before installation.
Leveling the Kegerator
It is important for the kegerator to be leveled for optimum efficiency. It can be raised or lowered
by rotating the two front leveling legs of the cooler. If you find that the surface is not level, rotate
the feet until the kegerator becomes level. You may need to make several adjustments to level
it.
1. If available, p
lace a carpenter’s level on top of the product to see if the kegerator is level from
front to back and side to side.
2. To adjust the height of the kegerator, simply turn the feet (Right = Lower / Left = Raise)
Installing the Guardrail
Snap the guardrail into the top of the cabinet’s guardrail pilot holes.
Installing the Casters
This unit comes with four (4) casters. These are an optional accessary to assemble if you would
like to make the unit more mobile. To install the casters:
1. Remove the two leveling legs from the bottom of the unit.
2. With the contents inside the cabinet removed, set the beer dispenser on its side.
3. Screw in the threaded caster to attach it to the cabinet.
4. With all four casters tightened evenly, stand the unit in an upright position.
Operation
Installation Check List before Operation

Have all packing materials and tape been removed from the interior and exterior of the
kegerator?

Have the installation instructions been followed, including connecting the machine to
electricity? And has proper grounding been installed for the kegerator?

Has the machine been leveled?

Is the kegerator in a site where the ambient temperature is between 50ºF and 95ºF all year
round?