Edge AI Box - NX Indoor User’s Manual
Safety Precautions
doc02351
© Copyright 2020-2021 EDGEMATRIX, Inc. All rights reserved.
9
Cautions During Use
¢
Usage Environment
• Avoid areas subject to frequent impact and/or vibration. Also, avoid dropping the product. These conditions may
affect the delicate internal components of this product, causing damage and/or loss of functionality.
• Do not use or store this product in direct sunlight, under high temperature, under extreme cold, under high humidity,
or in dusty areas. Damage may result.
• Please use the product within the specified temperature and humidity range.
Temperature range: -10 to + 50°C
Humidity range: 10 to 95% (avoid condensation)
• Do not use this device outdoors.
• Do not vibrate, impact, or cut the power to this product during data writing or transmission. This may cause
loss/corruption of data.
¢
Installation
• Do not install near corrosive chemicals or in areas where corrosive gasses may be produced.
• Do not install in areas that allow for contact with substances that are flammable or act as solvents at low
temperatures.
• Be sure to turn off the power to this device when attaching and detaching cameras, cables, etc. Attaching/detaching
cameras, cables, etc. to this device while powered on can result in damage.
• Do not pull or bend cables, or place a load on the connectors. Damage to the connectors may result.
• Securely tighten all screws.
• Do not insert metallic or other objects into the LTE or Wi-Fi modules. Damage may result.
• Please do not place a load on the LTE module in excess of what is required when inserting/removing the SIM card.
• Do not insert metallic or other objects into the LTE or Wi-Fi modules.
• Do not use excess force when inserting a pin into the jumper pin.
¢
Other
• Please turn off the power to this product before cleaning.
• To clean, wipe with a soft, dry cloth. Cleaning with alcohol, paint thinner, benzene, detergent, glass cleaner, or other
chemicals may result in damage.
• When transferring or disposing of this product, delete all recorded data. If data remains on the device, it may be
nefariously downloaded and used for malicious purposes by a third party.
• If you feel something is malfunctioning with this product, immediately cease operation, cut the power, and contact our
company.
• The user is responsible for executing new commands after image update (Flash). Executing an incorrect command
can damage the Edge AI Box image.
In the unlikely event that a user update (Flash) causes a system malfunction, our company shall bear no
responsibility. In such cases, repairs may require an additional fee even if the device is still under warranty.
