Edge AI Box - NX Indoor User’s Manual
9 Image Update (Flash)
doc02351
© Copyright 2020-2021 EDGEMATRIX, Inc. All rights reserved.
29
6
Connect the AC adapter to the Edge AI Box
power connector.
7
The AC adapter power cord plugs into a wall
outlet.
8
Press the power button.
Turn on the Edge AI Box.
9
Three or more seconds after power on,
insert the yellow jumper pin to position 3.
10
Run the command “$ lsusb” again on the host PC, and ensure that “nVidia” is displayed in the
device list.
11
Run the command “$ cd Linux_for_Tegra” on the host PC.
Move to the Linux_for_Tegra folder.
12
Next, run the command “$ sudo ./flash.sh -r jetson-xavier-nx-devkit-emmc Mmcblk0p1” on the
host PC.
Image Update (Flash) will begin. Once the update is complete, Linux (L4T) will automatically boot up on the Edge
AI Box.
*1 Update (Flash) will take about 30 minutes.
*2 It may take several seconds before the Linux bootup text appears. During this time, do not turn off the power to
the device.
*3 The time it takes for the bootup text to appear may vary depending on the monitoring environment or other
factors.
Notice
Copy-pasting commands from this text may result in the insertion of unintended code and subsequent
incorrect execution. This in turn may cause damage to Edge AI Box. It is recommended that commands be
entered by hand exactly as shown here.
