Edge EZ User Manual
Edge Products
12
2.
Using the pliers, remove the crimp style clamp from the hose on the brass
fitting located on the now exposed lower front side of the turbocharger.
Remove the hose from the brass fitting and dispose of the crimp style clamp.
3.
Using the 7/16” wrench, unscrew the stock brass fitting out of the turbocharger
housing. Using the 7/16” wrench, install the supplied brass fitting, tighten-be
careful not to over-tighten. Slip the supplied hose clamp onto the stock hose,
install the stock hose onto the supplied brass fitting and tighten the hose clamp
with the ¼” socket. Reinstall the stock air hose onto the air filter housing and
turbocharger inlet. Using the 5/16” socket, tighten both clamps securely.
4.
Using the 7/16 deep socket tighten all of the intercooler hose clamps on the air
intake.
