Quick Start Guide
–
2
–
Check the System LEDs
1.
Verify basic operation by checking the system LEDs. When
operating normally, the Power LED should be on green and the
Status LED should be either on blue or blinking when the device
is booting up.
Connect Network Cables
1.
For the 1000BASE-T RJ-45 ports, connect 100-ohm Category 5,
5e or better twisted-pair cable.
2.
For the SFP slots, first install SFP transceivers and then connect
fiber optic cabling to the transceiver ports.
The following transceivers are supported:
1000BASE-SX (ET4201-SX)
1000BASE-LX (ET4201-LX)
1000BASE-ZX (ET4201-ZX)
1000BASE-LHX (ET4201-LHX)
3.
As connections are made, check the port status LEDs to be sure
the links are valid.
On/Blinking Green — Port has a valid link. Blinking
indicates network activity.
Make Initial Configuration Changes
1.
Connect a PC to one of the SD-WAN Edge CPE’s LAN ports.
2.
Log in to the web interface using the default management IP
address 192.168.100.1 (there is no user name or password).
3.
Configure the Barrista controller IP address and port through
one of the following methods.
DHCP: Automatic configuration.
Static: Manually set the IP address, subnet mask, default
gateway, and DNS servers.
PPPoE: Set the PPPoE username and password.
4.
Click “Save” to confirm the configuration and enable the SD-
WAN Edge CPE to communicate with the Barrista controller.
Hardware Specifications
4
1
1
5
3
1
2
6
Chassis
Size (WxDxH)
42.6 x 27.0 x 4.4 cm (16.8 x 10.6 x 1.7 in.)
Weight
2.64 kg (5.81 lb)
Temperature
Operating: 0 °C to 40 °C (32 °F to 104 °F)
Storage: -20 °C to 70 °C (-4 °F to 158 °F)
Humidity
Operating: 10% to 90% (non-condensing)
Interfaces
Network
Ports 3-10: RJ-45 10/100/1000BASE-T
Ports 1-2 RJ-45 10/100/1000BASE-T or SFP
USB
1 USB 3.0
Console
RS-232 serial, RJ-45 port
Power
AC Input
100-240 VAC 50-60 Hz 2.5 A
Power Consumption 65 Watts Maximum
Maximum Current
0.9 A
Regulatory Compliances
Emissions
CE Mark
EN 55032, Class A
EN 61000-3-2, Class A
EN 61000-3-3
FCC Class A
CNS 13438
47 CPR FCC Part 15:2016, Subpart B, Class A
ANSI C63.4:2014
CISPR 32.2015 + COR1:2016, Class A
AS/NZS CISPR 32:2015, Class A
Canada Std. ICES-003:2016 Issue 6, Class A
Immunity
IEC 61000-4-2/3/4/5/6/8/11
Safety
UL 62368-1 & CAN/CSA C22.2 No. 62368-1-14
CB IEC/EN 60950-1 & IEC/EN 62368-1 2nd.
BSMI Safety Standard CNS14336-1
Taiwan RoHS
CNS 15663
