Edge-Core ES3526VA-PoE, Installation Manual, Page: 39 / 74

Installing an SFP Transceiver
3-7
3
Installing an SFP Transceiver
Figure 3-5 Installing an SFP Transceiver
The SFP slots support the following optional SFP transceivers:
• 100BASE-FX
• 1000BASE-SX
• 1000BASE-LX
• 1000BASE-LH
To install an SFP transceiver, perform the following steps:
1. Consider your network and cabling requirements to select an appropriate SFP
transceiver type.
2. Insert the transceiver with the optical connector facing outward and the slot
connector facing down. Note that SFP transceivers are keyed so they can only be
installed in one orientation.
3. Slide the SFP transceiver into the slot until it clicks into place.
Note: SFP transceivers are hot-swappable. The switch does not need to be powered off
before installing or removing a transceiver. However, always first disconnect the
network cable before removing a transceiver.
Note: SFP transceivers are not provided in the switch package.
22
23
24
23
24
ES3526V
A-PoE
Link/A
ct
PoE
25
26
Pwr
Diag
Stack
Mode
PoE
/Link
RPS