Edge-Core ES3526VA-PoE, Installation Manual, Page: 34 / 74

Installing the Switch
3-2
3
Ethernet Cabling
To ensure proper operation when installing the switch into a network, make sure that
the current cables are suitable for 10BASE-T or 100BASE-TX operation. Check the
following criteria against the current installation of your network:
• Cable type: Unshielded twisted pair (UTP) or shielded twisted pair (STP) cables with
RJ-45 connectors; Category 3 or better for 10BASE-T and Category 5 or better for
100BASE-TX and 1000BASE-T connections.
• Protection from radio frequency interference emissions
• Electrical surge suppression
• Separation of electrical wires (switch related or other) and electromagnetic fields
from data based network wiring
• Safe connections with no damaged cables, connectors or shields
Figure 3-1 RJ-45 Connections
Equipment Checklist
After unpacking this switch, check the contents to be that sure you have received all
the components. Then, before beginning the installation, be sure that you have all
other necessary installation equipment.
Package Contents
• 24-Port Fast Ethernet PoE Switch
• AC power cord
• Owner registration card
• Serial cable
• Rack mounting kit
• This Installation Guide
• Management Guide
Note: An optional stacking connector and cable is also available.
R J-45 C onnector